|
It is a great pleasure for us to inform our customers that TORE AAMODT AS now has
entered into as a distributor for ABP-Antriebstechnik GmbH in Norway.
This enable us to deliver shaft couplings, gear heads (gear boxes) and single gear parts.
|
|
We
are happy to inform our customers that TORE AAMODT AS now has entered into
an Advanced Partnership with FRABA POSITAL GmbH. This enable us
to deliver Absolute Rotary Encoders of high quality.
 
More information...
|
|
|
FRABA
POSITAL GmbH
|
|
|
|
Capacitive
high performance sensors now with sensitivity indication!
Rechner-Sensors now offer their
new capacitive high performance sensors with an option of sensitivity
indication (SI). The user will see, by means of a second LED, if the
adjusted sensing distance is within the allowed range. The LED is green
within the type dependent nominal sensing distance (Sn); it is orange
from Sn until Smax and it flashes red if the sensing distance exceeds
the maximum usable sensing distance. The sensor should not be used in
this status. With this sensitivity indication the user can easily
determine the optimal sensing distance for the application.
This feature is available for capacitive sensors with diameter > 30
mm. |
|
RECHNER SENSORS
|
|
|
|
High
Performance Proximity Sensor. M32 - 50 mm Sensing Distance!
A new record sensing distance is achieved with
Rechner’s High Performance Proximity Sensors. The M32 threaded sensor with a 5 cm active area
and flush mounting allows a sensing distance of more then 50 mm. This corresponds to 5 times the
Sn of a standard M30 sensor.
The PEEK covered active area offers excellent protection, since this material is
considered as oil resistant, resistant to nearly all chemicals and physiologically harmless.
It also has very good mechanical characteristics, like abrasion resistance.
This 4 wire DC sensor is available with antivalent (NO/NC) PNP switching output. |
|
RECHNER SENSORS
|
|
|
|
Capacitive
Proximity Sensor. M8 - so small yet also such High Performance
Gourmets will know about Lampertheim’s exquisite asparagus. Also it is
no news that Lampertheim is the origin of excellent sensor technology,
capacitive sensors from RECHNER. New, is that Rechner’s M8 x 1 body
capacitive sensors are now also available with the exceptional High
PerformanceCharacteristics. That means with 3 times higher sensing
distance than the norm, high temperatur stability up to 100°C and
excellent EMC-characteristics. Moreover it has a potentiometer for the
sensitivity adjustment. |
|
RECHNER SENSORS
|
|
|
|
The Top-Team In
The Ex-Area
RECHNER-Sensors have a wide reaching program of Ex-protected sensors. The product
family comprise capacitive and inductive proximity sensors in cylindrical size from 6.5 to
40 mm in diameter. NAMUR sensors and proximity sensors with NPN or PNP transistor
output rank among the standard. With the ex-protected isolation amplifiers the product
range is complete. The ATEX-certified units are available for areas with danger of gas
explosion (Zone 0,1 and 2) and for areas with danger of dust explosion (Zone 20, 21 und
22). Being an ATEX certified firm, RECHNER can also offer sensors with a
manufacturer declaration for both of these exlosion danger areas. |
|
RECHNER SENSORS
|
|
|
|
ATEX - Inductive NAMUR-Sensors For Zone
20
Good News for companies that operate in areas with the risk of dust-explosion and which
have need of sensors for StEx Zone 20. RECHNER Industrie-Elektronik have increased
their considerable program of ATEX-products with inductive NAMUR sensors for Zone 20.
They are available now in a variety of different sizes.
No  -plosions
The unquestionable competence of the RECHNER Team of engineers, ensures complete
safety for all those who are in need of inductive and capacitive sensors, for gas- or dust
explosive areas. The Ex-audited manufacturer has once again enlarged its range of certified
ATEX sensors. Apart from capacitive, you will also find inductive proximity switches in
sizes from M12 that can be used in gas explosive, as well as in dust explosive areas. The
sensors are even permitted when completely mounted within Zone 20 i.e. inside flour silos
or industrial mills. All these sensors are certified by international notified bodies so your
safety is under control.
|
|
RECHNER SENSORS
|
|
Capacitive
Sensor - an all round performance ensures everything runs well
!
Rechner’s capacitive filling
level detection sensor is especially designed for the detection
of very adhesive products. The non-stick
characteristic of the PTFE housing is enhanced with
the round tip of the sensor. These sensors are often used in the
chemical industry as well as in the food
industry. Sensing only takes place at the tip of the sensor, which also
ensures that there is no problem from unwanted
switching caused by product build-up on the
wall of the container. A simple clear design, and the very best
technical characteristics, is exactly what industry would expect from a
company with nearly 40 years of sensor technology
experience as the specialist in capacitive detection sensors and
systems. |
|
|
|
RECHNER SENSORS
|
|
 |
2REX-H-SR
True line count, 1-9000 ppr |
|
|
| Encoder type |
Hollow shaft encoder |
| SMD-Technology |
Strong compact
electronic |
| High IP-rating |
Standard IP 67 |
| Low current consumption |
Connected directly to
PLC's and counters |
| Short circuit
protection |
Thermal shut down at
155°C |
| Wide supply range |
4.5-30V |
| Max frequency / Max rev |
Max 300 kHz or
max 1500 rev / min |
| Hollow shaft sizes |
ø10,ø12,ø14,ø15
mm |
| Flange diameter |
ø68 mm |
|
|
 View
certification
|
View
installation manual
|
|
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
Product News
